top of page

Bracelet en Grey Agate from the ONIRIQUE collection.

 

925 Silver clip.

gray agate

CHF 29,00Price
  • CHOOSE A STRAP SIZE USING AN EXISTING STRAP

    Select a bracelet you are comfortable with.  Lay it flat.  Using a ruler, measure the length from the top of the clasp to the end of the bracelet. Configure your bracelet with the nearest larger size.

     

     

    CHOOSE THE SIZE OF A BRACELET BY TAKING YOUR MEASUREMENTS

    To measure your wrist, you can:

    Use a measuring tape. Wrap it around the wrist on which you will wear your bracelet. Write the number indicated at the point where the 0 meets the tape._cc781905 -5cde-3194-bb3b-136bad5cf58d_Choose a slightly larger variant if you like your bracelet not to fit too tightly.

    Download and printthe wrist scaler.  Check before that the option " Scale paper " is set to 8190 "_cc7 5cde-3194-bb3b-136bad5cf58d_non ” in your print settings dialog box. The wrist sizer should be printed on a full A4 sheet. Follow the prompts, then select your wrist size.

     

     

    HOW TO USE THE WRIST MEASURER?

    Print and cut out the paper wrist sizer and follow the instructions below.

    Make sure the numbers are on the outside of the measurer.  Once you have folded and cut out the measurer, insert the pointed end into the opening you cut on the line à l'autre extrémité en suivant les indications [Fold & Cut Here]. Insérez votre poignet et pull the pointed end until it is comfortably snug on your wrist.  Take care not to tear the measurer or you will have to repeat the procedure.

    The number that is on the alignment of the edges of the opening indicates the size of your wrist.

    You can also use a tailor's meter or, failing that, a cord. Wrap it around your wrist and measure the length with a ruler.

Related Products